Bar-K / JT BB
Powder Coating recommendations sought - Printable Version

+- Bar-K / JT BB (https://bar-k.org)
+-- Forum: Our Community Bulletin Boards (https://bar-k.org/forumdisplay.php?fid=29)
+--- Forum: Bar-K Ranch / Jamestown / Ward BB (https://bar-k.org/forumdisplay.php?fid=30)
+--- Thread: Powder Coating recommendations sought (/showthread.php?tid=3458)



Powder Coating recommendations sought - Laurel Wanrow - 07-22-2024

Has anyone had powder coating done that you would recommend the shop? Or the reverse-a bad situation to avoid?

Thanks!
Laurel
703-475-2448


RE: Powder Coating recommendations sought - Rich-17WardSt - 07-23-2024

(07-22-2024, 10:38 AM)Laurel Wanrow Wrote: Has anyone had powder coating done that you would recommend the shop? Or the reverse-a bad situation to avoid?

Thanks!
Laurel
703-475-2448



RE: Powder Coating recommendations sought - EricH - 07-23-2024

Hi Laurel!  Matt Klein and I have been using Premium Powder Coating in Longmont for our garage project down here in Springdale.  

Depending on material, Matt always has them sandblast, prime, and finish coat.  He says that skipping the priming is not a good idea, even though it might save some money on the front end.  

https://premiumpowdercoating.com/

They do terrific work, are friendly in the office, and have a ton of colors and textures to choose from.  

Good luck!


RE: Powder Coating recommendations sought - Laurel Wanrow - 07-25-2024

(07-23-2024, 10:39 PM)EricH Wrote:  

Thanks for your endorsement, Eric.
Laurel